PTFE Smoothbore Hose with Stainless Steel Braid

The PTFE Smoothbore Hose with Stainless Steel Braid is a smooth-bore metallic hose in the PTFE Smoothbore family. PTFE core with single braid of Type 304 SS. Working pressure to 350 bar, operating temperature -73°C to +260°C.

Construction

• Type: PTFE Smoothbore — Smoothbore PTFE with SS braid
• Construction: Smooth-Bore
• Core material: PTFE
• Braid: Single Braid — Type 304 SS
• End fitting material: Carbon steel or 316SS — sanitary tri-clamp, NPT, JIC, or flanged per order
• Nominal ID range: DN 5 (3/16") to DN 50 (2")
• Bend radius (static): 50 mm minimum
• Bend radius (dynamic): 200 mm minimum

Performance

Maximum working pressure 350 bar at the smallest bore (decreases with increasing diameter — refer to the OEM size table for per-size ratings). Minimum burst pressure 1400 bar with safety factor 4:1 per ISO 10380. Operating temperature range -73°C to +260°C (continuous service; intermittent excursions evaluated on request). All assemblies hydrotested at 1.5× working pressure with a witness-test certificate available on request.

Applications

• High-pressure hydraulic transfer (clean fluids)
• Paint and ink transfer (smoothbore — minimal residual)
• Aggressive chemical small-bore lines
• Pharmaceutical / cosmetic high-pressure transfer

Compliance

• ISO 10380:2012 N/A (Corrugated Metal Hoses and Hose Assemblies)
• Pressure Equipment Directive 2014/68/EU Module A
• EN 10204 3.1 / 3.2 mill test reports on request

How to order

Confirm (a) line working pressure and process medium, (b) operating temperature range, (c) bore size and overall length, (d) end fitting type per side (NPT / BSPP / ANSI 150-1500# RF / DIN PN10-PN40 / sanitary tri-clamp / camlock / butt-weld / etc.), (e) braid configuration (unbraided / single / double / triple — drives pressure rating), (f) any required certifications (ISO 10380 PSL class, PED Module, ASME conformance, NACE MR0175, CGA / UL / Chlorine Institute). Indus quotes ex-Dubai for stock items and ex-OEM for build-to-order, with mill test reports and pressure-test certificates included.

Companion products

Pair with matched ANSI flange gaskets, hose clamps, and OEM end-fitting hardware. For high-vibration installations, also specify a Lock-Section or Armor-Flex external hose guard. For fire-rated runs, add a Fry-Sil Fire Jacket or Fire Tape covering. For high-cycle or premium-corrosion service, ask about the matched OEM expansion-joint variant of the same alloy and pressure class.