O-Rings for SAE Hydraulic Flanges — Hydraulic SAE Flange family accessory for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
The O-Rings for SAE Hydraulic Flanges is a Accessory / spare part hydraulic adapter in the Hydraulic SAE Flange family. O-Rings for SAE Hydraulic Flanges — Hydraulic SAE Flange family accessory for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Working pressure matches the host port grade and the lowest-rated component in the assembly. Operating temperature -40°C to +120°C.. Hydraulic SAE Flange family — SAE J518 4-bolt flanges (Code 61 standard / Code 62 high-pressure) with BSP- or NPT-threaded back, weld-in / weld-on, blind-flange, or accessory variants.
Specify (a) the host port size and thread spec on each end, (b) any special seal requirements (bonded seal vs ED seal vs cone seat), and (c) whether you need stainless-steel construction or non-standard surface treatment. Indus engineering will confirm the correct part number against your equipment.
Pair with the appropriate Indus tubing or hose ends. For tube assemblies use Indus DIN 2353 cutting rings and end nuts. For hose assemblies pair with Indus crimp ferrules and the matching hose grade.
| Parameter | Value |
|---|---|
| Body Configuration | accessory |
| Parameter | Value |
|---|---|
| Port A Thread | SAE J518 flange-face O-ring (Code 61 / Code 62 sizes 1/2" to 5") |
| Port A Sealing | flange-face |
| Port A Gender | none |
| Parameter | Value |
|---|---|
| Nominal Size Range | 1/2" to 5" |
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J518 (matching O-ring spare) |