No-skive crimp ferrule for the most-stocked single-wire and two-wire braid hoses to EN 853 1SN / 2SN. For EN 853 1SN, EN 853 2SN, DN6 – DN51 (1/4" – 2").
The No-Skive Crimp Ferrule for 1SN / 2SN Hose is a no-skive crimp ferrule for EN 853 1SN, EN 853 2SN hose, available across DN6 – DN51 (1/4" – 2").
Pressure rating matches the host hose grade — the ferrule does not derate the assembly. Fatigue tested to ISO 6803 / SAE J343 impulse cycles when crimped to the recommended diameter on the matching crimp die.
Specify (a) the host hose grade and bore size, (b) the matching fitting (insert) at each end, and (c) total assembly length plus orientation. Indus crimps and pressure-tests the assembly before dispatch — see the FAQ for our crimping service.
Pair with Indus metric or DIN hose fittings from this catalogue.
| Parameter | Value |
|---|---|
| Ferrule Type | no-skive |
| Compatible Hoses | EN 853 1SN, EN 853 2SN |
| Parameter | Value |
|---|---|
| Nominal Size Range | DN6 – DN51 (1/4" – 2") |
| Parameter | Value |
|---|---|
| Crimp Method | Crimped over the cover — no skiving required, faster fitting |
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 12151 |
| Parameter | Value |
|---|---|
| Sold By | each |