2 in × 150# RF floating ball valve, 285 psi standard-service per API 608 / ASME B16.34. General-purpose isolation for utility, instrument-air, and low-pressure process service.
The Floating Ball Valve, 2 in × 150# RF, 285 psi, Standard Service is a ball — floating ball valve rated for 285 psi working pressure with 2 in 150# ANSI Raised-Face Flange inlet and 2 in 150# ANSI Raised-Face Flange outlet. Standard service rated for clean hydrocarbon and water-cut streams.
Working pressure 285 psi (ANSI 150 class). Manufactured to API 608. Service class: Standard.
Confirm (a) line pressure rating and pressure class, (b) inlet and outlet end-connection sizes / styles, (c) service class (sour vs standard), (d) bore preference (full vs reduced port), and (e) any temperature, fugitive-emissions, or fire-safe certification requirements. Indus quotes ex-Dubai with full mill test reports, API monogram traceability where applicable, and pre-shipment hydrostatic / shell test certificates.
Pair with matched-pressure check valves, plug valves, and flow-iron unions of the same end-connection family. For wellhead service, also specify gate valves and surface safety valves of the equivalent API 6A pressure class. For frac applications, the 1502, 602, and 206 Weco unions are the most common matched standards.
| Parameter | Value |
|---|---|
| Valve Type | Ball — Floating |
| Parameter | Value |
|---|---|
| Nominal Size | 2 in |
| End Connection (Inlet) | 2 in 150# ANSI Raised-Face Flange |
| End Connection (Outlet) | 2 in 150# ANSI Raised-Face Flange |
| Bore Type | Full Port |
| Parameter | Value |
|---|---|
| Working Pressure | 285 psi |
| Pressure Class | ANSI 150 |
| Service Class | Standard |
| Parameter | Value |
|---|---|
| API Specification | API 608 |
| PSL Class | N/A |
| PR Class | N/A |
| Parameter | Value |
|---|---|
| Body Material | Cast carbon steel (WCB) |
| Trim Material | 316SS ball + 316SS stem |
| Seal / Elastomer Material | RPTFE seats + Viton (FKM) O-rings |