Banjo BSP — SS316L stainless-steel Banjo hose fitting, banjo, male. Passivated 316L for chemical, marine, and food-grade hydraulic service.
The Banjo BSP is a SS316L stainless-steel hydraulic hose fitting in the banjo configuration. Manufactured from 316L (austenitic, low-carbon, marine-grade) stainless steel and passivated for native corrosion resistance — ideal for chemical, marine, food-grade, and pharmaceutical hydraulic service where carbon-steel fittings would corrode.
Pressure rating tracks the host hose grade and ferrule when crimped to the correct diameter. Operating temperature -40°C to +200°C (limited by hose / O-ring material). 316L resists chloride pitting, marine atmosphere, dilute mineral acids, and food-grade cleaning chemistry.
Specify (a) the host hose grade and bore size, (b) the matching SS316L crimp ferrule (also available from Indus), and (c) the thread size on the SS316L body. Indus crimps and pressure-tests the assembly on request.
Pair with Indus SS316L crimp ferrules and the matching SS316L hose grade for a fully stainless assembly. Browse the SS316L Fittings sub-section under Hoses & Fittings for matching thread families.
| Parameter | Value |
|---|---|
| Fitting Configuration | banjo |
| Thread Form | BSPP G1/8 to G3/4 (banjo eye + bolt) |
| Sealing Form | Bonded-seal washers on bolt (DIN 7642 banjo) |
| Thread Gender | male |
| Parameter | Value |
|---|---|
| Nominal Size Range | G1/8 to G3/4 |
| Parameter | Value |
|---|---|
| Material | 316L stainless steel (austenitic, low-carbon, marine grade) |
| Surface Treatment | Passivated 316L (no plating; native corrosion-resistant oxide layer) |
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 228-1 (BSPP), DIN 7642 |