Metric-thread banjo bolt for connecting a banjo-eye fitting to a tapped port — fuel, oil, brake, and pilot circuits. banjo bolt, Metric (M10×1.0 to M22×1.5 — common sizes), Banjo washer (copper or aluminium).
The Banjo Bolt — Metric Thread is a banjo bolt hydraulic hose fitting, male thread with Banjo washer (copper or aluminium) sealing form. Compliant with ISO 6149-1 (metric port), bonded-seal washers per DIN 7603.
Pressure rating matches the matching ferrule and host hose grade. Tested to manufacturer recommended impulse cycles when crimped to the correct ferrule diameter. Operating temperature -40°C to +120°C; refer to fluid compatibility chart for aggressive media.
Specify (a) the host hose grade and bore size, (b) the matching ferrule, and (c) the thread size you need (M16×1.5, M22×1.5, etc.). Indus crimps and pressure-tests the assembly before dispatch.
Pair with Indus crimp ferrules from the matching hose grade — see the Crimp Ferrules category for compatibility tables.
| Parameter | Value |
|---|---|
| Fitting Configuration | banjo-bolt |
| Thread Form | Metric (M10×1.0 to M22×1.5 — common sizes) |
| Sealing Form | Banjo washer (copper or aluminium) |
| Thread Gender | male |
| Parameter | Value |
|---|---|
| Nominal Size Range | M10 – M22 |
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 6149-1 (metric port), bonded-seal washers per DIN 7603 |