BSP-thread banjo bolt for connecting a banjo-eye fitting to a tapped port — fuel, oil, brake, and pilot circuits. banjo bolt, BSP parallel (G1/8 to G3/4 — common sizes), Banjo washer (copper or aluminium).
The Banjo Bolt — BSP Thread is a banjo bolt hydraulic hose fitting in the BSP family — male thread with Banjo washer (copper or aluminium) sealing form. Compliant with ISO 228, BS 5200, DIN 7603 (bonded-seal washers).
Pressure rating matches the matching ferrule and host hose grade — see Indus Crimp Ferrules for compatibility tables. Tested to manufacturer-recommended impulse cycles when crimped to the correct ferrule diameter. Operating temperature -40°C to +120°C; refer to fluid compatibility chart for aggressive media.
Specify (a) the host hose grade and bore size, (b) the matching crimp ferrule (see the Crimp Ferrules category), and (c) the thread size you need. Indus crimps and pressure-tests the assembly before dispatch.
Pair with Indus crimp ferrules from the matching hose grade. For other thread families see the Metric, BSP, JIC 37°, DIN, and Japanese sub-categories under Hose Fittings.
| Parameter | Value |
|---|---|
| Fitting Configuration | banjo-bolt |
| Thread Form | BSP parallel (G1/8 to G3/4 — common sizes) |
| Sealing Form | Banjo washer (copper or aluminium) |
| Thread Gender | male |
| Parameter | Value |
|---|---|
| Nominal Size Range | G1/8 – G3/4 |
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 228, BS 5200, DIN 7603 (bonded-seal washers) |